pinoykah.blogspot.com

you've downloaded (all parts) and right click on part 1 "Extract to folder, enter password,then all parts will be extracted and you will see the ISO or CSO file. Put this ISO or CSO file in to, main ISO folder which is on the PSP Memory Stick..

If you're getting wrong password error,

1- You may have entered a wrong password. All the passwords are : hako
2- Your file is missing or corrupted.When winRAR is extracting the part it will stop and tell you which rar file has been corrupted,delete corrupted part redownload the corrupted part!.because if the file is missing winrar wile give "wrong password" error.use download accelerators for ifile.it (internet download manager)
3- Only use one compression software.
4- http://ifile.it or http://mediafire.com or http://RGhost or http://duckload.to/ or http://www.megaftp.com or http://usershare.net/ download the games with the download accelerators (Internet Download Manager)
5- Adrive.com : download accelerators not allowed

Internet Download Manager 5.18 with crack : http://www.megaupload.com/?d=HP2X29IF or http://ifile.it/08pfwxg

ifile.it Download..

If you're getting "Service Temporarily Unavailabele" error message : - Please don't open more than 2 parallel connections per download from same server.

if your download will stop. In this situation,(for ifile.it)

1. If download does not complete stop the download (don't delete).
2. Request download link for the same file.
3. Do not click on the "Download file" link. Instead, right click on that link and and then "copy shortcut" or "copy link" (depends what browser you are using).
4. Right click>Properties on the incomplete download in Internet Download Manager and clear the address box and then paste the link you copied. Click OK.
5. Highlight the incomplete download and then click Resume on the top menu bar.

CSO>ISO or ISO>CSO Converter PSP ISO Compressor v1.4

http://www.megaupload.com/?d=JC6JLCQY

................ or ................

http://www.mediafire.com/download.php?mgnyynt3xy2 Password : hako

.................................................. ......................................

ISO_TOOL_V.5 Prometheus...(For Patch)

ISO_TOOL_V.5 Prometheus... CLICK HERE

.................................................. ......................................

Custom Firmware 5.50 GEN-D3 DIRECTLY

http://www.megaupload.com/?d=TW2ELPHT

................ or ................

http://ifile.it/pv7934n

Requeriments and Install :
- Installation requires a PSP with 4.01 M33 or higher CFW (Only v1 and v2 motherboard users.)
Offical sony firmwares And PSP3000 and PSP2000 v3 motherboards shouldn't try it.
- Battery 78% loaded,
- Extract the file you have downloaded anywhere on your computer.
- Connect your PSP to your computer using the USB cable.
- Copy the "UPDATE" folder into /PSP/GAME
- Copy the "550.PBP" file into main menu (memory stick first page)
- Exit USB Mode And run the "5.50 GEN-D3" from GAME section..
- Press "X" for Enter
- Select "Flash Install CFW 5.50 GEN-D3" and Press "X". Start install.. please wait.
- When install completed press the "X" button to restart automaticly.. done..
- Look at the version : System settings > System informations > Version : 5.50 GEN-D3

- Now..You got to have backup of your files.. And format memory stick from psp "system sttings > format memory stick..

- Now .. Check all your recovery settings..

Configuration >
UMD Mod (currently : Sony NP9660 -NO UMD-)
Use VSHMenu (Currently) : VSHMenu
Use version.txt (corrently) : Enabled
CPU Clock XMB : 222/111 or Default
CPU Clock GAME : 222/111 or Default

- And Play the games..

PSP 2000 v3 motherboard and PSP 3000 users, install 5.03 GEN-C.. Custom Firmware 5.03 GEN-C CLICK HERE

Custom Firmware 5.50 GEN-D directly

http://www.megaupload.com/?d=FN0FMZD1

................ or ................

http://ifile.it/m9gpxel

Requeriments and Install :

- Installation requires a PSP with 4.01 M33 or higher CFW (Only v1 and v2 motherboard users.)
Offical sony firmwares And PSP3000 and PSP2000 v3 motherboards shouldn't try it.
- Battery 78% loaded,
- Extract the file you have downloaded anywhere on your computer.
- Connect your PSP to your computer using the USB cable.
- Copy the "UPDATE" folder into /PSP/GAME
- Copy the "550.PBP" file into main menu (memory stick first page)
- Exit USB Mode and run the "PSP Update ver GEN"
- Press "X" for Enter
- Select "Flash Install CFW 5.50 GEN-D" and Press "X". Start update.. please wait.
- When update completed press the "X" button to restart automaticly.. done..
- Then you can erase "550.PBP" file and "UPDATE" folder, they won’t be any longer necessary.

5.50 GEN-D2 UPDATE......

http://www.megaupload.com/?d=QDC16K46

................ or ................

http://ifile.it/oz6v71j

- Only 5.50 GEN-D users
- Copy the "GEN-D2" folder into /PSP/GAME/ .. and Run it..
- Then you can erase "GEN-D2" folder, they won’t be any longer necessary.

Please check 5.50 GEN Recovery Settings from recovery menu:

Configuration >
UMD Mod (currently : Sony NP9660 -NO UMD-)
Use VSHMenu (Currently) : VSHMenu or Enabled
Use version.txt (Currently) : Enabled
CPU Speed : Default or 222

Advanced > Advanced Configuration :
Plain modules in UMD/ISO : Disabled
Execute BOOT.BIN in UMD/ISO : Disabled

Custom Firmware 5.50 GEN-A

http://www.megaupload.com/?d=XWEFQYV3

................ or ................

http://ifile.it/wlmkqet

Requeriments and Install :
- Installation requires a PSP with 3.52 M33-3 or higher CFW[Phat PSP], And 3.60 m33 or higher CFW [Slim PSP] (Only with v1 and v2) users.) Offical sony firmwares And PSP3000 and PSP2000 v3 motherboards shouldn't try it.
- Battery 78% loaded,
- Extract the file you have downloaded anywhere on your computer.
- Connect your PSP to your computer using the USB cable.
- Copy the "UPDATE" folder into /PSP/GAME
- Exit USB Mode and run the "PSP Update version x.xx"
- the screen turns black. Follow the on screen instructions, these instructions will take you to the Official Sony Update screen. press X for start..Press ">" button to continue..press "Accept" .. press ">" .. and press the "X" button Start update.. please wait..when update completed press the "X" button to restart automaticly.. done..
- Then you can erase "UPDATE" folder, they won’t be any longer necessary.

5.50 GEN-B Update

http://ifile.it/jzgo56h Password : hako

- Only 5.50 GEN-A users
- Offical sony firmwares And PSP3000 and PSP2000 v3 motherboards shouldn't try it.
- Copy the "5.50-genB2" folder into /PSP/GAME/ .. and Run it..
- Then you can erase "5.50-genB2" folder, they won’t be any longer necessary.

5.50 GEN-B2

http://www.megaupload.com/?d=9FQPT1P4

................ or ................

http://ifile.it/43wuvok

- Offical sony firmwares And PSP3000 and PSP2000 v3 motherboards shouldn't try it.
- Only 5.50 GEN-A or 5.50 GEN-B users
- Copy the "5.50-genB2" folder into /PSP/GAME/ .. and Run it..
- Then you can erase "5.50-genB2" folder, they won’t be any longer necessary.

ALL 5.50 Gen-A or 5.50 GEN-B or 5.50 GEN-D Popsloader....

http://www.megaupload.com/?d=P6KSBPTT password : hako

................ or ................

http://www.mediafire.com/download.php?qee2f0oljmy password : hako (Popsloader+Screenshot+CWCHEAT_0_2_2_REV_D)

Copy the "seplugins" folder into the main menu (Memory stick first page)

And Start by fully turn off your PSP by holding the power button for a couple of seconds. After the screen goes dark, you know it’s off, and you can let go. Then press the big R button on top, and hold it. Next turn on the PSP (still holding the R button!), and you will see the recovery menu..

Go to "Plugins ->" before to change it to disabled (all files).. and again all plugins enabled..exit recovery menu..done..

.................................................. ......................................

5.50 GEN-A or 5.50 GEN-B2 or 5.50 GEN-D2 or 5.50 GEN-D3 Back to 5.00 M33-6

http://www.megaupload.com/?d=8GK7L732 Password : hako

................ or ................

http://www.mediafire.com/download.php?mnmtz0ewoyy Password : hako

Requeriments and Install :

- Battery 78% loaded,
- Extract the file you have downloaded anywhere on your computer.
- Connect your PSP to your computer using the USB cable.
- Copy the "RECOVERY" folder into /PSP/GAME
- Copy the "500.PBP" file into main menu (memory stick first page)
- Exit USB Mode and run the "Hellcats Recovery Flasher"
- Select "I agree"
- Select "Flash new 5.00-M33"
- Select ”Reset (format) settings as well” ... done..It will be 5.00-M33. check your from system settings..
- Then you can erase "RECOVERY" folder and "500.PBP", they won’t be any longer necessary.
- Update 5.00 M33-6 (from my page) Title "Custom Firmware 5.00 M33-6 Update"
- Install 1.50 kernel mod only for fat psp...(from my page) Title"Custom Firmware 5.00 M33 1.50 Kernel Mod For Hombrew Games"
- Install 5.00 m33 Popsloader for psx games...(from my page) Title "5.00 M33 Seplugins Folder with 5.00 M33-X Popsloader + Screenshot + CWCHEAT_0_2_2_REV_D (For PSX GAMES)"

.................................................. ......................................

Custom Firmware 5.00 M33-6 Update

http://www.megaupload.com/?d=C3QL1XDL

................ or ................

http://ifile.it/wkocxif

- Only for 5.00 M33, 5.00 m33-2, 5.00 m33-3, 5.00 m33-4, 5.00 m33-5 users..
- Copy the "UPDATE" folder into /PSP/GAME and run it..

Custom Firmware 5.00 M33-6 directly (Other M33 users)

http://www.megaupload.com/?d=1ODPYUXN

................ or ................

http://ifile.it/6hkyrq8

Requeriments and Install :
- Installation requires a PSP with 3.52 M33-3 = > < =4.01 M33-2 [fat PSP], or 3.60 m33 = > < = 4.01 M33-2 [Slim PSP] Others and Offical sony firmwares shouldn't try it.
- USB cable.
- Battery 78% loaded,
- Extract the file you have downloaded anywhere on your computer.
- Connect your PSP to your computer using the USB cable.
- Copy the "UPDATE" folder into /PSP/GAME
- Exit USB Mode and go to your XMB
- After you run the "PSP Update version 5.00"
- the screen turns black. Follow the on screen instructions, these instructions will take you to the Official Sony Update screen. press X for start..Press ">" button to continue..press "Accept" .. press ">" .. and press the "X" button Start update.. please wait..when update completed press the "X" button to restart automaticly.. done..
- Then you can erase "UPDATE" folder, they won’t be any longer necessary.

Custom Firmware 5.00 M33 1.50 Kernel Mod For Hombrew Games

Only for Phat PSP (PSP slims shouldn't try it.)

http://www.megaupload.com/?d=HUNQBMGE

................ or ................

http://www.mediafire.com/download.php?imjnnz53nkf Password : hako

- Extract the file you have downloaded anywhere on your computer.
- Connect your PSP to your computer using the USB cable.
- Copy the "150k_installer" folder into /PSP/GAME/
- Copy the "150.PBP" file into Main Menu (memory stick first page)
- Exit USB Mode and go to your XMB.After you run the 1.50 kernel addon for 5.00.. done..
- Then you can erase "150k_installer" folder and "150.PBP" file , they won’t be any longer necessary.

5.00 M33 Seplugins Folder with 5.00 M33-X Popsloader + Screenshot + CWCHEAT_0_2_2_REV_D (For PSX GAMES)

http://www.megaupload.com/?d=1AFD1PS9

................ or ................

http://www.mediafire.com/download.php?m4ykdzgyjq3 Password : hako

Copy the "seplugins" folder into the main menu (Memory stick first page)

And Start by fully turn off your PSP by holding the power button for a couple of seconds. After the screen goes dark, you know it’s off, and you can let go. Then press the big R button on top, and hold it. Next turn on the PSP (still holding the R button!), and you will see the recovery menu..

Go to "Plugins ->" all plugins enabled..exit recovery menu..

And Check all your Recovery Settings, in Recovery mode.

Configuration >
UMD Mod (currently : Sony NP9660 -NO UMD-)
Use VSH Menu (corrently) : Enabled
Use version.txt (corrently) : Enabled
Autrun program : Disabled
CPU Speed : 333 <...........> Default.. Optimum : 222

Advanced > Advanced Configuration :
Plain modules in UMD/ISO : Disabled
Execute BOOT.BIN in UMD/ISO : Disabled

exit recovery mod....

Or click SELECT and > < and ^ v check all your settings..

For PSX Game
Game start+(still holding the R button!),you will see pops list> Select "pops 3.xx" or 4.01 or Original flash.. and ok..